China Factory for Pvc Single Ply Roofing - NRC rubbering coating – Hongyuan

Short Description:

ProductDescriptionThe product is modified bitumen waterproof coating made from rubber modified bitumen and special additives through special process. It may be applied with other waterproof membranes to form composite waterproof layer. When being used as an independent waterproof layer, it...

Send email to us Download as PDF

Product Detail

Product Tags

Feedback (2)

Our firm sticks to the basic principle of "Quality is the life of your company, and status will be the soul of it" for China Hdpe Self Adhesive Waterproof Membrane, Pvc Membrane Roof, Hdpe Self-Adhesive Membrane, As an expert specialized in this field, we are committed to solving any problem of high temperature protection for users.

China Factory for Pvc Single Ply Roofing - NRC rubbering coating – Hongyuan Detail:

Product

Description

The product is modified bitumen waterproof coating made from rubber modified bitumen and special additives through special process. It may be applied with other waterproof membranes to form composite waterproof layer. When being used as an independent waterproof layer, its surface shall be protected by insulation layer.Product model and specification (varying from construction methods):Spraying type, painting type, grouting and sealing type

Product Features

● Self-reparation: the material will not separate during construction, which may form stable and seamless waterproof layer. Waterproof layer damaged in construction and operation will be self-repaired to prevent water from infiltrating into waterproof layer, and to maintain the continuity of waterproof layer.● Adhesion: waterproof material can be adhered with base course even in water to ensure good waterproof effect when structural deformation occurs.● Leaching resistance: the waterproof material will not leach for the reason of underground water flushing after construction.
● Chemical resistance: excellent acid, alkali, and salt resistant performance;
● Easy construction: low requirements on base course and free from special treatment to shorten construction period, and construction at low temperature is allowed;
● Easy maintenance and management
● High solid content, and no volatile matters;
● Never solidify, non-toxic, odorless, and pollution-free;
● The product may be preserved in sealed container for a long period, without affecting its performance.

Application Scope

NRC non-solidify rubber bitumen coating may be applied as waterproof treatment for newly constructed buildings, or to repair damaged waterproof layer. It is applicable to waterproofing of common places, as well as deformation joints and other special positions. Compared with other waterproof materials, it has unique advantages in waterproof treatment for special positions.

Construction Features

● The product may be used to form waterproof layer, or to adhere waterproof membranes as waterproof glue, so as to form composite waterproof layer.● It has good adhesive effect with all kinds of waterproof membranes (including EPDM rubber membrane, polyethylene polypropylene fiber waterproof membrane), which may form composite waterproof layer.● Adhering with base course to form skin-like waterproof layer to prevent channeling water;
● Low requirements on base course humidity, and construction may be implemented soon when water on base course is cleaned, so as to shorten construction period;
● Diversified process and convenient construction: the product may be painted or sprayed in construction.
● Outstanding low temperature constructability: spray construction may be implemented under low temperature conditions.
● High adaptability to structural deformation: the material has outstanding extensibility and adhesion to perfectly adapt to structural deformation, and to avoid waterproof layer damage caused by structural deformation. When forming composite waterproof layer with membranes, NRC non-solidify rubber bitumen coating can absorb all deformation stress to assure long-term intactness of composite waterproof layer.

Composite Construction with Membrane (Spray)

Heating of NRC Non-solidify Rubber Bitumen Coating

Spraying of NRC Non-solidify Rubber Bitumen Coating

Membrane Paving

Construction Complete

Technical Performance Index

Executive Standard: Non-solidify Rubber Bitumen (NRC) Coating (Q/0783WHY003-2012)

SN	Items		Index
			Model I	Model II
1	Solid Content % ≥		80	98
2	Adhesive Performance	Dry Base ≥	100% Cohesive Failure
		Wet Base ≥
3	Extensibility / mm ≥		4	15
4	Low Temperature Flexibility		-20°C, no fissure	-25 °C, no fissure
5	Thermal Resistance / °C		60	70
			No sliding, flowing or dropping
6	Thermal Aging 70°C×168h	Extensibility / mm ≥	2	15
		Low Temperature Flexibility	-15°C, no fissure	-20 °C, no fissure
7	Acid Resistance	Appearance	No change
		Extensibility / mm ≥	4	15
		Mass Change / %	±2.0
8	Alkali Resistance	Appearance	No change
		Extensibility / mm ≥	4	15
		Mass Change / %	±2.0
9	Salt Resistance	Appearance	No change
		Extensibility / mm ≥	4	15
		Mass Change / %	±2.0
10	Seal-healing Performance		No permeating
11	Creep under Tearing State / N/mm	Standard Condition	0.1~1.0
		Thermal Aging	0.1~1.0
12	Anti-channeling Performance / 0.6MPa		No channeling

Product detail pictures:

abide by the contract", conforms into the market requirement, joins in the market competition by its good quality also as provides a lot more comprehensive and great company for purchasers to let them turn into huge winner. The pursue from the firm, would be the clients' gratification for China Factory for Pvc Single Ply Roofing - NRC rubbering coating – Hongyuan, The product will supply to all over the world, such as: Ghana, Slovenia, Germany, Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.

China High-Quality Waterproofing System

Cold Applied Roofing Systems

Liquid Rubber Membrane

Polymer Coating

Polyurethane Waterproofing

Roofs Waterproofing

The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.

By Dinah from Doha - 2016.02.14 13:19

This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.

By Catherine from New Orleans - 2016.09.16 13:44